Back to Blog
How-to Guides 2026-10-31 Sim Racing Cockpits, Gaming Chairs and more 10 views

Asetek Forte Pedal Face Plates: Installation and Adjustment

Asetek Forte Pedal Face Plates: Installation and Adjustment

Learn how to install and adjust Asetek Forte Pedal Face Plates on your Invicta pedals, with tips for sock-friendly driving and common mistakes to avoid.

Quick answer

Install the Asetek Forte Pedal Face Plates directly onto your Invicta pedals using the included hardware, then adjust them to your preferred angle and position for a comfortable, sock-friendly driving experience.

Why adjust the face plates?

The Forte Pedal Face Plates are designed for quick mounting and easy adjustment, so you can fine-tune the pedal surface to match your driving style. Whether you prefer a flatter angle for heel-toe or a more vertical position for consistent braking, the adjustment range lets you dial in the feel without changing the pedal set itself.

A common trade-off: a more aggressive angle can improve control but may cause fatigue on long stints. Start with a neutral position and make small changes as you get used to the new surface.

Sock-friendly by design

The all-aluminum construction provides a durable, non-slip surface that works well whether you're wearing racing shoes or just socks. The texture is grippy enough to keep your foot planted, but not so aggressive that it wears on bare feet.

If you drive in socks, you may want to keep the face plates slightly flatter to avoid excessive pressure on the ball of your foot. This is a simple adjustment you can make after a few laps.

Installation and adjustment steps

  1. Gather tools and parts: You'll need the two Forte Pedal Face Plates, the mounting screws (included), a hex key or Allen wrench that fits the screws, and access to the front of your Invicta pedals. Make sure the pedal set is unplugged or the rig is powered off to avoid accidental input. Check that you have the correct hex key size before starting.
  2. Remove the existing pedal faces: Locate the screws on the back of the current pedal faces. Loosen them with the hex key and slide the old faces off. Keep the screws in a safe place—you'll reuse them for the new plates. Don't force the faces off; if they stick, double-check that all screws are fully removed.
  3. Mount the Forte face plates: Align the new face plate over the pedal arm, ensuring the mounting holes line up. Insert the screws and tighten them by hand first, then use the hex key to snug them down. Avoid over-tightening, as the aluminum threads can strip. Tighten evenly—alternate between screws to keep the plate level.
  4. Adjust the angle to your preference: Loosen the screws slightly, tilt the face plate to your desired angle (flatter for socks, more vertical for shoes), and retighten. Test the position by pressing the pedal a few times before fully locking it down. Make small adjustments and test each time—don't go straight to an extreme angle.
  5. Test and fine-tune: Plug in your pedals and run a few laps or brake tests. If your foot slips or you feel discomfort, repeat the adjustment step. The quick-mount design makes it easy to iterate. If the plate feels loose after testing, re-tighten the screws—vibration can loosen them over time.

Product facts

  • Asetek Forte Pedal Face Plates (2 pcs): The all-aluminum Forte Pedal Face Plates are a sock-friendly, quick-to-mount accessory to your Invicta Sim Racing Pedals. You can swap or adjust the pedal surface in minutes, and the aluminum finish gives you a consistent grip whether you race in socks or shoes.
    Asetek Forte Pedal Face Plates (2 pcs)
    Asetek Forte Pedal Face Plates (2 pcs)

Related Articles

Customer Service
Home
Products
Cart
Profile