Mounting the Asetek Invicta: what the specs confirm
- What torque does the Asetek Invicta Wheelbase produce, and why does that matter for mounting?
- The supplied product record lists the Invicta as a 27Nm direct drive wheelbase. Torque is the force your rig has to absorb, so a 27Nm unit puts more demand on the mount and frame than a lower-torque base. The record does not include mounting instructions or a recommended rig type, so treat the 27Nm figure as the starting point for a conversation with your cockpit manufacturer rather than a mounting spec.
- Does the Invicta use a standard wheelbase bolt pattern?
- The supplied information does not confirm a bolt pattern, bolt size, or hole spacing for the Invicta. Before you buy or drill, check the mounting dimensions on the wheelbase itself or ask the retailer for the mounting drawing. Do not assume a pattern from another Asetek model or from a generic direct drive base.
- Can I mount the Invicta to a wheel stand instead of a full cockpit?
- The supplied record does not state which stands or cockpits are compatible. A 27Nm base is a serious load, so a stand that flexes will blunt the feedback the Invicta is built to deliver. If you plan to use a stand, confirm its rated wheelbase capacity and mounting plate pattern with the stand maker first.
Invicta specs that shape the fit decision
- Asetek Invicta Wheelbase: 27Nm Direct Drive Wheelbase Torque is the load your mount and frame must control; it is the main reason to check rig rigidity before buying.

Asetek Invicta Wheelbase - Asetek Invicta Wheelbase: Resolution of 0.000085 degrees, approximately 4,000,000 steps per wheel revolution Fine resolution is only useful if the base is held firmly; a flexing mount can mask the detail the Invicta is designed to send.
Clearance and setup questions
- How much clearance does the Invicta need around the wheel?
- The supplied record does not give external dimensions, so no clearance figure can be confirmed here. Measure the space around your mounting plate and check the wheelbase dimensions before installing. Leave room for the wheel rim and for any cables or quick-release hardware you plan to use.
- Does the Invicta need a specific cockpit or rig?
- The supplied record does not name compatible cockpits or rigs. Because the base is rated at 27Nm, choose a rig whose maker confirms it can handle a direct drive base of that torque. If the maker does not publish a rating, ask before you buy.
- What is included with the Invicta Wheelbase?
- The supplied record lists one variant, Standard, and does not itemize box contents, cables, or mounting hardware. Check the product listing or ask the retailer what ships with the base so you can plan the install.
- Is the Invicta a good first direct drive wheelbase?
- The record positions the Invicta around 27Nm and very high resolution, which are strong specs. Whether it suits a first direct drive setup depends on your rig and experience, and the supplied information does not include a recommendation. If you are moving up from a belt-driven base, plan for a stiffer mount than you may currently use.
What to confirm before you commit
The Invicta's headline figures are clear in the supplied record: 27Nm of torque and roughly 4,000,000 steps per revolution. What the record does not include is just as important for a mounting decision. Bolt pattern, external dimensions, box contents, and a list of compatible rigs are all absent from the supplied information.
That means the practical next step is to get those details from the product listing or the retailer before you drill, cut, or buy a new cockpit. Use the 27Nm rating to judge whether your current frame is likely to cope, and use the resolution figure to decide whether the base is worth the upgrade for the feedback you want. The rest of the fit has to come from confirmed dimensions, not assumptions.


