Back to Blog
How-to Guides 2026-10-31 Sim Racing Cockpits, Gaming Chairs and more 9 views

MOZA R12 V2 Wheel Base: Setup and Compatibility Guide

MOZA R12 V2 Wheel Base: Setup and Compatibility Guide

A step-by-step guide to setting up the MOZA R12 V2 wheel base, including mounting options and torque specs, plus compatibility advice for MOZA wheels.

Quick answer

Mount the MOZA R12 V2 wheel base to your rig using the included bolts and the new front-mounting points, then pair it with any MOZA wheel for a precise, high-resolution force feedback experience.

What's new in the V2

The MOZA R12 V2 features a 21-bit, 2.09 million high-resolution chip that improves force feedback detail and realism. It also adds bolting points for front mounting, giving you more placement options on your sim rig.

Compatibility notes

The R12 V2 works with all MOZA wheels, including the MOZA KS Wheel and MOZA R3 PC Wheel. It does not include a wheel or pedals, so plan your bundle accordingly. The base is designed for desktop or rig mounting; front-mounting points are new to V2 and may require a compatible mounting bracket.

Setup steps

  1. 1. Choose mounting position: Decide between standard desktop mount or the new front-mounting option. Front mounting requires a bracket that fits the V2's bolting points. Check your rig for available mounting holes before you start.
  2. 2. Secure the base: Use the supplied bolts to attach the R12 V2 to your rig or desk. Tighten to 5 Nm (44 in-lb) for M6 bolts. Do not overtighten. Over-tightening can strip threads or crack the base plate.
  3. 3. Connect power and USB: Plug in the USB cable to your PC and connect the power adapter. The base is recognized as a USB controller. Use a USB 3.0 port for best performance; avoid USB hubs if possible.
  4. 4. Attach your MOZA wheel: Align the wheel's quick-release hub with the R12 V2's shaft and push until it clicks. No tools required for this step. Make sure the wheel is fully seated before use or force feedback may be erratic.
  5. 5. Calibrate in software: Open MOZA's Pit House software and run the calibration wizard. Confirm the base and wheel are detected. If the base isn't recognized, try a different USB cable or port.
  6. 6. Test force feedback: Launch a sim title and test force feedback strength. Adjust in Pit House if needed. Default settings are a good starting point. High force feedback can cause clipping; reduce it if you feel vibration at the stops.

Product highlights

  • MOZA RACING R12 V2 Wheel Base: Upgraded 21-bit 2.09 million high-resolution chip for improved force feedback detail and realism. You get smoother, more nuanced force feedback that makes the driving feel more connected to the virtual road.
    MOZA RACING R12 V2 Wheel Base
    MOZA RACING R12 V2 Wheel Base

Related Articles

Customer Service
Home
Products
Cart
Profile