MOZA mBooster Base Extension Plate: Purpose and Installation

By Sim Racing Cockpits, Gaming Chairs and more | Published: 2026-11-05

Category: 產品評論

The MOZA mBooster Base Extension Plate adapts your CRP2 pedal base for the mBooster Active Pedal. Learn what it does, how to install it, and when you need it.

Quick answer

The MOZA mBooster Base Extension Plate is a mounting adapter that lets you attach the mBooster Active Pedal to a CRP2 Racing Pedals base. You need it if you are upgrading a CRP2 set with the mBooster and want a secure, factory-style fit.

Why the extension plate matters for your pedal base

The mBooster Active Pedal is a force-feedback pedal that adds realistic resistance and travel, but it does not bolt directly to every pedal base. The extension plate bridges that gap for the CRP2, giving you a stable mounting point without drilling or custom fabrication.

Without the plate, you would have to improvise a mount, which can lead to flex, misalignment, or inconsistent pedal feel. The plate keeps the mBooster aligned with your existing pedals so your braking input stays predictable.

When you can skip it

If you already own a pedal base that natively supports the mBooster, or if you are not using a CRP2 base, this plate is not required. It is specific to the CRP2 Racing Pedals base and the mBooster Active Pedal combination.

Also, if you are still deciding between the mBooster and a traditional load-cell brake, the plate is only part of the upgrade cost. Factor in the pedal itself and any other accessories before committing.

Frequently asked questions

What does the MOZA mBooster Base Extension Plate actually do?: It is an adapter plate that mounts the mBooster Active Pedal to the CRP2 Racing Pedals base. It provides a secure, aligned connection so the active pedal can function properly without custom brackets.
How do I install the extension plate?: First, attach the connector block to the mBooster Active Pedal extension plate using the M6X10 screws. Then secure the extension plate to the CRP2 Racing Pedals base with the M12X20 screws. Tighten both sets evenly. Check that the plate sits flush before fully tightening the M12 screws.
Is the extension plate required for every mBooster setup?: No. It is only needed when you are mounting the mBooster to a CRP2 base. Other bases may have different mounting requirements, so check compatibility before buying.
Are there any safety concerns?: The product is not suitable for children under 6, and small accessories may pose a choking hazard. Children under 13 should be supervised. If you notice any abnormality, stop using it immediately and seek advice. Keep small parts away from young children during installation.

Product facts

MOZA RACING mBooster Base Extension Plate: The kit includes M6X10 screws for the connector block and M12X20 screws for securing the plate to the CRP2 base. You get the correct fasteners for both stages of the install, so you do not need to source separate hardware.
MOZA RACING mBooster Base Extension Plate