How to Attach a TSS Mount to Your Sim Rig: Step-by-Step Guide

By Sim Racing Cockpits, Gaming Chairs and more | Published: 2026-10-28

Category: How-to Guides

Learn how to install a TSS Mount on your ART Racing Cockpit in easy steps. Get the right position for your Thrustmaster TSS shifter and avoid common mistakes.

Quick answer

Attach the TSS Mount to the side or front of your ART Racing Cockpit's shifter area, then bolt your Thrustmaster TSS shifter onto it. The mount is designed specifically for ART cockpits, so no extra drilling is needed.

Why the TSS Mount fits the ART Racing Cockpit

The TSS Mount is made to bring your Thrustmaster TSS shifter into a comfortable, practical position on an ART Racing Cockpit. It uses the existing mounting points, so you don't need to modify the frame.

If you have a TITAN cockpit, you can skip this mount entirely. The TITAN's gear shifter mount already supports the TSS shifter naturally, so adding this bracket would be redundant.

Step-by-step TSS Mount installation

Gather tools and parts: You'll need the TSS Mount, the bolts that came with your ART Racing Cockpit, and an Allen key or socket set that matches those bolts. Check that the TSS shifter is not yet mounted. Lay out all parts before starting—missing a bolt mid-install is a common delay.
Locate the shifter mounting area on your ART cockpit: Find the pre-drilled holes on the cockpit frame where the shifter mount normally attaches. The TSS Mount is designed to line up with these holes, so no drilling or modification is required. If the holes don't line up, double-check that you have the correct mount version for ART—do not force the bolts.
Bolt the TSS Mount to the cockpit frame: Position the TSS Mount over the holes and insert the bolts. Tighten them firmly but avoid over-torquing, which can strip the threads. Use a thread locker if your cockpit kit includes one. Over-tightening is the most common mistake—snug is enough.
Attach the Thrustmaster TSS shifter to the mount: Place the TSS shifter onto the mount's mounting plate and secure it using the shifter's own mounting hardware. Make sure the shifter is oriented so the shift throw feels natural for your seating position. Test the shift throw before fully tightening—a 10-degree angle change can make a big difference.
Adjust and test the position: Sit in your cockpit and reach for the shifter. Adjust the mount's angle or height if your model allows it, then tighten everything. Shift through all gears to confirm smooth operation without interference. If the shifter feels too high or low, re-adjust before final tightening—don't settle for a compromise.

Product fact

TSS Mount: This mount upgrade allows you to place your Thrustmaster TSS Shifter in a comfortable and practical position on an ART Racing Cockpit. It saves you from awkward shifter placement and keeps your hand in a natural, race-ready position during long sessions.
TSS Mount