How to Use the Dual-Locking Seat Slider Kit for Easy Rig Access

By Sim Racing Cockpits, Gaming Chairs and more | Published: 2026-10-26

Category: How-to Guides

Learn how to install and use the Dual-Locking Seat Slider Kit to add quick seat adjustment to your sim racing cockpit, improving comfort and rig access.

Quick Answer

Install the Dual-Locking Seat Slider Kit to add forward and backward adjustment to your racing seat, making it easy to slide back for rig access and forward for driving.

Why Add a Seat Slider to Your Sim Rig?

If your racing seat is bolted directly to the cockpit frame, getting in and out of the rig can involve awkward climbing or loosening bolts. A dual-locking seat slider gives you a simple way to move the seat forward and backward without tools, so you can position yourself comfortably for driving and slide back to step out.

The Dual-Locking Seat Slider Kit is designed for GT Omega cockpits and rear seat frames, but it also works with office chairs when paired with the GT Omega Conversion Plate (sold separately). This flexibility makes it a practical upgrade for both dedicated sim rigs and hybrid setups.

Step-by-Step Installation and Use

Gather Tools and Parts: Unbox the kit and verify you have the dual slider rails, the adjustment bar, all fixings, and the allen key. Check that your seat is compatible with the slider rails—if you're using an office chair, you'll need the GT Omega Conversion Plate (sold separately). Lay out all parts before starting to avoid mid-install surprises.
Attach the Slider Rails to the Seat: Position the dual slider rails under the seat, aligning the mounting holes with the seat's existing holes. Use the supplied fixings and allen key to secure the rails firmly. Tighten bolts evenly to avoid cross-threading. Ensure the rails are parallel and evenly spaced to prevent binding.
Mount the Seat onto the Cockpit Frame: Place the seat with the attached sliders onto your GT Omega cockpit or rear seat frame. Align the slider rails with the frame's mounting points and secure them using the appropriate bolts. Double-check that the slider mechanism moves freely before fully tightening. Test the slider movement before final tightening to catch alignment issues early.
Release and Adjust the Seat: To adjust, pull the single adjustment bar to release the locking mechanism. Slide the seat forward or backward to your desired position, then release the bar to lock it in place. The process takes just three easy steps. Always ensure the seat is fully locked before driving to prevent unexpected movement.
Verify Locking and Comfort: Sit in the seat and test the lock by trying to slide it with the bar released and with it locked. Adjust the seat to a comfortable driving position where you can reach pedals and wheel without stretching. If the seat moves while locked, re-check the rail alignment and bolt tightness. A properly locked slider should have no play—if it does, revisit the installation steps.

Product Facts

Dual-Locking Seat Slider Kit: The Dual-Locking Seat Slider Kit adds forward and backward seat adjustment to any compatible racing seat on your GT Omega cockpit or rear seat frame. You can quickly reposition your seat to suit different drivers or to make getting in and out of the rig easier.
Dual-Locking Seat Slider Kit