Asetek Universal Footrest Adjustment Guide

By Sim Racing Cockpits, Gaming Chairs and more | Published: 2026-10-25

Category: How-to Guides

Learn how to adjust your Asetek Universal Footrest for optimal sim racing comfort. Step-by-step instructions to prevent foot rub and improve your racing experience.

Quick answer

Adjust your Asetek Universal Footrest by checking clearance, loosening the mounting bolts, repositioning the footrest, and tightening everything securely to prevent foot rub during long sim racing sessions.

Why adjustment matters for comfort

The Asetek Universal Footrest is designed to give your foot a resting place during long races, especially when space between your pedal and rig is tight. Without proper adjustment, you risk rubbing your foot against the edge of the rig, which can cause discomfort and distraction. Getting the angle and height right reduces fatigue and keeps you focused on the track.

Step-by-step adjustment process

Check clearance first: Before loosening anything, sit in your sim rig in your normal driving position. Place your foot where it naturally rests when not pressing a pedal. Note if your foot touches the rig edge or if there is any rubbing. This tells you where the footrest needs to go. Common mistake: skipping this step and guessing the position, which often leads to multiple re-adjustments.
Loosen the mounting bolts: Using the appropriate tool (usually an Allen key or hex driver), loosen the bolts that hold the footrest to your rig. Do not remove them completely — just enough to allow the footrest to slide or rotate. Common mistake: removing bolts entirely, which can cause small parts to drop and get lost in the rig.
Position the footrest: Slide the footrest so it sits directly under your resting foot. Adjust the angle so the surface is flat or slightly tilted toward your heel. The goal is to support your foot without forcing your ankle into an unnatural bend. Common mistake: tilting the footrest too far forward, which makes your foot slide off during long races.
Tighten and test: Tighten the mounting bolts firmly but not over-torqued. Sit back in your rig and place your foot on the footrest. Simulate a few pedal presses and resting positions. If there is still rubbing or discomfort, repeat steps 2 and 3. Common mistake: over-tightening, which can strip the threads or crack the mounting bracket.

Product facts

Asetek Universal Footrest: The all-aluminum footrest carries design elements from the Invicta Pedals and is CNC laser cut in-house for precision. The aluminum build ensures durability and a stable platform, while the precision cutting means it will mount cleanly without sharp edges that could snag your shoe.
Asetek Universal Footrest