How to Mount PRIME Caster Wheels on Your Sim Racing Cockpit
By Sim Racing Cockpits, Gaming Chairs and more | Published: 2026-10-29
Category: How-to Guides
Learn how to mount PRIME Caster Wheels on your sim racing cockpit with this step-by-step guide. Includes tips for adjusting rubber feet and ensuring stability.
Quick Answer
Mount PRIME Caster Wheels by aligning each wheel with the mounting points on your Prime Cockpit, securing them with the provided hardware, and adjusting the rubber feet to level the rig and lock it in place.
Why Caster Wheels Change Your Setup
Adding caster wheels to your sim racing cockpit gives you the freedom to move your rig for cleaning, cable management, or simply shifting your setup to match a different seating position. The PRIME Caster Wheels are designed specifically for the Prime Cockpit, so the mounting process is straightforward and secure.
One trade-off to consider: with wheels installed, the cockpit becomes slightly taller. The adjustable rubber feet let you compensate for this by fine-tuning the height, but you should account for the added height when setting up your monitor or seating position.
Mounting Steps
- Prepare the cockpit: Place your Prime Cockpit on a flat, stable surface. If it's already assembled, flip it upside down or tilt it to access the bottom mounting points. If you have a seat attached, consider removing it to make the rig lighter and easier to handle. Check that all mounting holes are clear of debris before starting.
- Align the first wheel: Take one caster wheel and align its mounting plate with the pre-drilled holes on the cockpit frame. The wheel should sit flush against the frame. If the holes don't line up perfectly, double-check that you're using the correct set of holes for your model. Don't force the wheel into position; misalignment can strip threads.
- Secure the wheel: Insert the provided bolts through the mounting plate and into the frame. Tighten them with a wrench or socket, but avoid over-tightening—just snug is enough to hold firmly without damaging the threads. Use a threadlocker if you want extra peace of mind against vibration loosening.
- Repeat for all wheels: Attach the remaining five wheels the same way, working around the cockpit. Ensure each wheel is oriented so it can swivel freely without interfering with the frame or other components. Spin each wheel by hand after mounting to confirm it rotates smoothly.
- Adjust the rubber feet: Once all wheels are mounted, flip the cockpit upright. Adjust the rubber feet by turning them to level the rig on your floor. Tighten them until they make firm contact with the ground to lock the cockpit in place. Test the rig for stability by pushing on it from different angles; adjust feet as needed.
Product Facts
- PRIME Caster Wheels: The PRIME Caster Wheels come in a set of 6 and are compatible with the Prime Cockpit. You'll have enough wheels to outfit your entire rig, and you can trust they'll fit without needing adapters.
PRIME Caster Wheels - PRIME Caster Wheels: They feature fully adjustable rubber feet instead of traditional locking mechanisms. This design lets you level the cockpit on uneven floors and lock it in place without putting stress on the wheels or damaging your floor.
