MOZA CM2 HD Racing Dash: Mounting and Setup Guide
By Sim Racing Cockpits, Gaming Chairs and more | Published: 2026-11-02
Category: How-to Guides
Mount and configure your MOZA CM2 HD Racing Dash in the right order. Follow these steps to get clean telemetry, readable shift lights, and a stable touchscreen.
Quick answer
Mount the CM2 HD Racing Dash where the 5-inch screen sits in your natural sightline without blocking the wheel, then set up telemetry before you customize the UI. Get the physical position and data connection right first; cosmetic tuning comes last.
Position the dash before you touch the software
The CM2 HD's 5-inch touchscreen and 10 RGB shift indicators only help if you can read them at a glance. Sit in your normal driving position and check that the screen top aligns roughly with the base of your wheel rim, so your eyes travel a short distance from the track view.
Because the dash supports both MOZA and third-party setups, the mounting surface you choose should leave the rear connectors accessible. If your rig has a spare front-mount plate or dash bracket, use it; if not, plan a stable plate that does not flex under touch input.
Why telemetry comes before the UI
The dash is powered by a quad-core processor and displays real-time race data. That means the telemetry source is the foundation: if the data feed is wrong or delayed, no amount of UI customization will fix it. Confirm your sim is broadcasting the channels you want before you rearrange widgets or colors.
The 6 flag lights are a good early test. If they respond correctly to race flags in your sim, your telemetry link is working and you can move on to personalizing the layout.
When a third-party setup changes the order
On a non-MOZA wheelbase or sim, you may need to configure the telemetry output in your sim or middleware before the dash sees any data. In that case, do the software connection step before final cable dressing, because you may need to change ports or settings while testing.
The catalog does not list a specific mounting pattern or included bracket, so check what your rig or dash plate provides before you commit to a position. If the mounting hardware is not supplied, plan a stable adapter rather than relying on tape or a temporary clamp.
Step-by-step CM2 HD dash installation
- Choose a stable mounting position: Sit in your rig and mark where the dash sits in your sightline without blocking the wheel or track view. Check that the rear connectors remain reachable. Common mistake: mounting too high or too close, which forces you to look away from the road. Confirm the position with the wheel in place before drilling or bolting anything.
- Secure the dash to the rig: Bolt the dash to a rigid plate or bracket that does not flex when you tap the touchscreen. Route cables with slack so they do not pull on the connectors. Common mistake: over-tightening or using a flexible mount that makes touch input inaccurate. Push gently on the screen corners; if the mount moves, reinforce it.
- Connect power and data: Connect the dash to its power source and to the telemetry link used by your wheelbase or sim. For a MOZA setup, follow MOZA's connection order; for third-party setups, check your sim's telemetry output settings first. Common mistake: connecting data before power or using an unconfigured port. The dash should boot and show a live screen before you proceed.
- Verify telemetry channels: Open a practice session and check that speed, gear, and RPM appear on the dash. Trigger a flag or shift event to test the 6 flag lights and 10 RGB shift indicators. Common mistake: assuming the dash is broken when the sim is simply not broadcasting the channel. If one channel is missing, fix that channel in the sim before customizing the UI.
- Customize the UI last: Once data is confirmed, rearrange widgets, choose colors, and set shift-light thresholds to match your driving style. Keep the most important numbers large and central. Common mistake: overloading the 5-inch screen with too many small widgets. Do a final lap and check that you can read the key values at a glance.
Product facts
- MOZA RACING CM2 HD Racing Dash: 5-inch 720P touchscreen with customizable UI, 10 RGB shift indicators, and 6 flag lights. The screen size and indicator count set your minimum mounting clearance and tell you what to test first.
MOZA RACING CM2 HD Racing Dash
