Sim Racing Cockpits, Gaming Chairs and more

MOZA Flight Base Table Clamp: Installation and Compatibility Guide

MOZA Flight Base Table Clamp: Installation and Compatibility Guide

By Sim Racing Cockpits, Gaming Chairs and more | Published: 2026-10-30

Category: How-to Guides

Learn how to install the MOZA Flight Base Table Clamp for a stable, wobble-free flight sim setup. Step-by-step instructions and compatibility tips included.

Quick answer

The MOZA Flight Base Table Clamp secures your flight base to a desk or table edge in minutes using a simple clamp mechanism. Follow the steps below for a stable, wobble-free mount.

What you need before starting

The MOZA Flight Base Table Clamp is designed for desks and tables with a flat edge and a thickness between 10 mm and 50 mm. Check your table's edge profile and thickness before buying to avoid fit issues.

You will need a Phillips-head screwdriver and a clean, clutter-free workspace. The clamp itself comes with all necessary hardware.

Installation steps

  1. 1. Position the clamp on your table: Place the MOZA Flight Base Table Clamp on the edge of your desk or table where you want the flight base to sit. Ensure the clamp's upper plate sits flush on the tabletop and the lower jaw wraps under the edge. Common mistake: Placing the clamp too far from the edge can cause instability. The table edge must be fully inside the clamp's jaw.
  2. 2. Tighten the clamping knob: Turn the large knob on the underside of the clamp clockwise until the jaws grip the table firmly. Do not overtighten—stop when you feel resistance and the clamp does not slide when pushed. Checkpoint: After tightening, try to wiggle the clamp. If it moves, tighten a little more. If the table surface is delicate, place a cloth between the clamp and the tabletop to prevent scratches.
  3. 3. Attach your flight base: Align the mounting holes on your flight base with the pre-drilled holes on the clamp's top plate. Insert the provided bolts and tighten them evenly using a Phillips-head screwdriver. Common mistake: Tightening one bolt fully before the others can misalign the base. Tighten all bolts gradually in a cross pattern for even pressure.
  4. 4. Test stability: Gently apply pressure to the flight base in all directions. If the clamp or base shifts, check the table thickness and re-tighten the knob. For tables thinner than 10 mm, the clamp may not hold securely. Checkpoint: A stable mount should not move at all during normal use. If you feel wobble, consider using a thicker desk or a different mounting solution.

Product facts

  • MOZA FLIGHT Flight Base Table Clamp: Crafted from high-strength steel with a 5mm thick plate, it guarantees a secure and wobble-free experience. The steel construction and thick plate keep your flight base rock-solid even during aggressive maneuvers, preventing unwanted movement that can break immersion.
    MOZA FLIGHT Flight Base Table Clamp
    MOZA FLIGHT Flight Base Table Clamp

Shop Related Products

MOZA FLIGHT Flight Base Table Clamp

MOZA FLIGHT Flight Base Table Clamp

$48.28 $68.00

Shop Now