How to Install a Wheel Stand Chair Link

Quick answer

Installing a wheel stand chair link takes only a few minutes and stops your chair from rolling backward under braking, giving you a stable sim racing setup without needing a full cockpit.

Installation steps

1. 1. Position your wheel stand and chair: Place your wheel stand in your driving position and roll your chair up to it. Adjust the distance so your arms reach the wheel comfortably and your feet can press the pedals fully. Common mistake: setting the chair too far from the pedals. You should be able to depress the brake pedal without stretching.
2. 2. Attach the chair link to the wheel stand: Take the chair link and slide its mounting bracket onto the rear crossbar of your wheel stand. Most models use a simple clamp or bolt system. Tighten the fasteners by hand until snug—do not overtighten. Checkpoint: ensure the bracket is centered on the crossbar so the cradle aligns evenly with both rear casters.
3. 3. Position the cradle under your chair wheels: Roll your chair back slightly, then slide the cradle portion of the link under the rear wheels of your chair. The cradle should cup each caster without forcing the chair into an unnatural angle. Common mistake: forcing the cradle under only one wheel. Both rear casters must sit inside the cradle for the link to work properly.
4. 4. Secure the chair to the link: Depending on your model, either lower the chair so its wheels rest in the cradle or use the provided straps/pins to lock the casters in place. Give the chair a gentle push forward to confirm it's held. Checkpoint: if the chair still rolls slightly, tighten the connection at the wheel stand bracket or adjust the cradle height.

Product details

• Wheel Stand Chair Link: The GT Omega Wheel Stand Chair Link cradles your chair's wheels and stops any extra movement. This eliminates the need for a rear seat frame upgrade, saving space and money while providing a stable sim racing setup.